| All Northgate Engineering Vacuum Tanks can be tailored to fit your application and your truck. All of the vacuum units are manufactured by our skilled engineers. |
| |
|
| A typical specification could be: |
| |
|
| 1875mm dia x length to suit |
| |
|
| Tank and Component Details; |
| |
|
 |
Mild steel shell & torrespherical ends. |
|
Internal baffle fitted as surge reduction. |
|
Full roll over protection with air operated walkway, mounted inside combing. |
|
Top mounted manways hinging to RHS. |
|
Low profile primary shut off.
|
|
Control components stainless pneumatic shut off float fitted into tank. |
|
|
Front mounted secondary shut off fitted with vacuum & pressure relief valves, liquid filled vacuum gauge, sight glass & drain with ba11 valve, male camlock, dust cap & retaining chain. |
|
|
Separator fitted. |
|
Rear washout door hinging right. |
|
Inlet port with deflector plate & BSP male thread fitted to rear LHS of tank. Nickle plated air actuated brass ball valve with male camIock & dust cap & retaining chain. |
|
Dump port with air BSP male thread fitted into the lowest point of washout door. Stainless steel knife valve with male camIock & dust cap & retaining chain, remote access. |
|
EPA sample point fitted with ball valve with male camlock, dust cap & retaining chain. |
|
Sight glasses fitted at rear. |
|
|
2 x hose hooks at rear. |
|
|
Calibration with dip stick & guide tube fitted into tank with internal pad is fitted to base of tank. |
|
|
No sign brackets fitted. |
|
Rear conduit to suit wiring for rev & work lights. |
|
Mounting bracket to suit rev & work lights. |
|
Cable carrying rod to suit all wiring. |
|
Alloy hose trays fitted each side sloping at the rear of the track drain to the rear with male camlocks & dust caps with retaining chain, (outriggers each side to support h/trays). |
|
Shovel holder & crowbar box fitted. |
|
All steel components blasted, primed & painted with two pack. |
|
All plumbing steel reinforced rubber oil suction hose, clamped with bolted clamps. |
|
| Northgate Engineering is happy to advise on a specification to suit your application. Contact Us or ring (03) 9357 7307 to learn more. |
| Vain, Blower and Liquid Ring Pump are priced and supplied to your specification. |
Vacuum Tank - 12,000 LT
