| 1875mm dia x length to suit |
| |
| Tank and Component Details; |
| |
 |
Mild steel shell & torrespherical ends. |
|
Internal baffle fitted as surge reduction. |
|
Full roll over protection with air operated walkway, mounted inside combing. |
|
Top mounted manways hinging to RHS. |
|
Low profile primary shut off. |
|
Control components stainless pneumatic shut off float fitted into tank. |
|
Front mounted secondary shut off fitted with vacuum & pressure relief valves, liquid filled vacuum gauge, sight glass & drain with ba11 valve, male camlock, dust cap & retaining chain. |
|
Separator fitted. |
|
Rear washout door hinging right. |
|
Inlet port with deflector plate & BSP male thread fitted to rear LHS of tank. Nickle plated air actuated brass ball valve with male camIock & dust cap & retaining chain. |
|
Dump port with air BSP male thread fitted into the lowest point of washout door. Stainless steel knife valve with male camIock & dust cap & retaining chain, remote access. |
|
EPA sample point fitted with ball valve with male camlock, dust cap & retaining chain. |
|
Sight glasses fitted at rear. |
|
2 x hose hooks at rear. |
|
Calibration with dip stick & guide tube fitted into tank with internal pad is fitted to base of tank. |
|
Sign brackets fitted. |
|
Rear conduit to suit wiring for rev & work lights. |
|
Mounting bracket to suit rev & work lights. |
|
Cable carrying rod to suit all wiring. |
|
Alloy hose trays fitted each side sloping at the rear of the track drain to the rear with male camlocks & dust caps with retaining chain, (outriggers each side to support h/trays). |
|
All steel components blasted, primed & painted with two pack. |
|
All plumbing steel reinforced rubber oil suction hose, clamped with bolted clamps.
Trailer complete with Air brakes in accordance with ADR’s all tanks and valving supplied and fitted.
Air bag suspension in accordance with ADR’s
King pin supplied and fitted
Air line fittings and tail light fittings included
New tyres and wheels supplied and fitted
LED tail lights and rear bumper/underrun fitted “tail light wiring clipped to chassis as standard but sealed conduit and carrol fittings are available.
The trailer is also supplied with a small toolbox, however further tool storage is available
Certification plates
Dangerous goods compliance if required. |
| |
|
| |
|
Hydrovac is happy to advise on a specification to suit your application. Contact Us or ring (03) 9357 7307 to learn more. |
|
| Vain, Blower and Liquid Ring Pump are priced and supplied to your specification. |
| |
|
Vacuum Tank – Semi Trailer
