|
10,000Lt Demountable Vacuum Tanker
Includes: |
|
6mm mild steel barrels with two 6mm mild steel torrespherical ends. |
 |
|
A 915mm rear manway. |
|
Hooklift/skid rails to be fitted to the tank base with rear roller wheels and support frame. |
|
Roll over turret full length with s/steel or aluminium air operated hand rail. |
|
Front l/h side mounted access ladder. |
|
Two 450mm top mounted Inlet 100mm with deflector plates with 4inch brass ball valves and cam locks/dust cap manways, also 5mm primary shut off with cam lock fitting. |
|
Secondary shut off 75mm unit with pressure relief valves, vacuum gauge, 50mm drain ball valve. |
|
Outlet 100mm with 4inch brass ball valve with cam locks/dustcovers fitted to lowest point of rear of tank. |
 |
|
A wash out catchment tray fitted to the tank. |
|
EPA 50mm sample pot fitted with a 25mm ball valve and cam locks/dust cap. |
|
3off 100mm sight glasses fitted on rear of tank at positions of 1/2,3/4,and one near full. |
|
3off EIP holders fitted L/H, R/H, and at rear door of the tank. |
|
Rear work/rev lights brackets piping to houses wiring. |
|
Operating signage will be fitted to all valves and devices. |
|
Operators manual and a spare parts kit will be supplied with the tank. |
|
All works carried out on the above unit will generally comply with the Victorian EPA regulations. |
 |
|
All flexible piping will consist of steel reinforced rubber oil suction hose, and clamped with bolted clamps. |
|
Fit 350cfm vacuum pump with stand alone cooling system and 30hp stationary engine.
|
|
|
| Paint: |
|
Sandblasting, primed and painted in 2 pack enamel in white. |
| |
|
| |
|
|
For Sale
